Kingston ME KVR32S22S6 8 8GB 3200MHz DDR4 Non-ECC CL22 SODIMM 1Rx16 Retail

DESCRIPTION

This document describes ValueRAM's KVR32S22S6/8 as a 1G x 64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM)¸ 1Rx16¸ memory module¸ based on four 1G x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. This 260-pin SODIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

FEATURES

 Power Supply: VDD = 1.2V Typical

 VDDQ = 1.2V Typical

 VPP = 2.5V Typical

 VDDSPD = 2.2V to 3.6V

Nominal and dynamic on-die termination (ODT) for
data¸ strobe¸ and mask signals

 Low-power auto self-refresh (LPASR)

 Data bus inversion (DBI) for data bus

 On-die VREFDQ generation and calibration

 Single-rank

 On-board I2 serial presence-detect (SPD) EEPROM

 8 internal banks; 2 groups of 4 banks each

Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)

 Selectable BC4 or BL8 on-the-fly (OTF)

 Fly-by topology

 Terminated control command and address bus

 PCB: Height 1.18 (30.00mm)

 RoHS Compliant and Halogen-Free