Kingston Memory KVR16LS11/8 8GB DDR3 1600 SODIMM 1.35V Retail

Kingston Memory KVR16LS11/8 8GB DDR3 1600 SODIMM 1.35V Retail

$90.76

33 in stock

SKU: 138615 Category:

This document describes ValueRAM’s 1G x 64-bit (8GB) DDR3L-1600 CL11 SDRAM (Synchronous DRAM), 2Rx8, low voltage, memory module, based on sixteen 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.35V or 1.5V. This 204-pin SODIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

Features:

• JEDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~1.575V) Power Supply

• VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V)

• 800MHz fCK for 1600Mb/sec/pin

• 8 independent internal bank

• Programmable CAS Latency: 11, 10, 9, 8, 7, 6

• Programmable Additive Latency: 0, CL – 2, or CL – 1 clock

• 8-bit pre-fetch

• Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]

• Bi-directional Differential Data Strobe

• Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)

• On Die Termination using ODT pin

• Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C • Asynchronous Reset • PCB: Height 1.18” (30mm), double sided component

  • CL (IDD)
    11 Cycles
  • Row Cycle Time (tRCmin)
  • Refresh to Active/Refresh Command Time (tRFCmin)
    260ns (Min)
  • Row Active Time (tRASmin)
    35ns (Min)
  • Maximum Operating Power
    (1.35V) 2.721W
  • UL Rating
    94V 0
  • Operating Temperature
    0 C to 85 C
  • Storage Temperature
    -55 C to +100 C
  • Item Dimension (L”xW”xH”)
    2.17 x 6.7 x 0.52

    Weight
    1 lb

    Warranty Information
    Lifetime Manufacture

Weight 1 lbs